-
Quantity:
MORE INFORMATION
RESINA 2000
RESTORES AND PROTECTS WOOD
HIGHLY IMPERMEABLE
IN-DEPTH PENETRATION
SUITABLE FOR ALL REPAIRS
CUSTOMISED SYSTEM
CHARACTERISTICS
Resina 2000 is a solvent-free structural epoxy system designed for use in the construction, protection and restoration of wood, GRP and many other substrates. Resina 2000 is a technologically advanced system which offers excellent penetration, flexibility and adhesion which make it essential for maintaining and treating wood.
With Resina 2000 it is possible to obtain high strength wood-to-wood joints, surface protection and an impermeable hull. Wood treated with Resina 2000 becomes impermeable and stronger while maintaining its characteristics of flexibility and resistance. Once the hardener has been add, special additives can be mixed in to obtain fillers which are easy to apply and extremely strong.
TECHNICAL DATA
Curing mechanism: chemical reaction
Specific weight: 1,10 ± 0.02 kg/l
Volume solids: 100 %
Flash point: +102°C
Appearance: glossy
Colour: clear
Unit sizes: 0,75 L / 1,50 L / 15 L
SURFACE PREPARATION
Before using Resina 2000, check that the surface to be treated is completely dry and moisture-free. The wood to be treated must always be clean, dry and free from oil or grease, etc. Sand the surface before application.
APPLICATION
Mix the base and hardener in a ratio of 2:1 by volume or 70:30 by weight. The pot life following the addition of the hardener is 35 minutes at 20°C. Do not thin: to clean paint tools use Thinner 5610. For the sealing system apply 3-4 coats to a final thickness of 300-400 micron. The film of Resina 2000 needs at least 7 days at 20°C to fully cure before it can be used. The drying time depends on the application temperature. For application at temperature below 15°C use Additivo 2000 LT (see data sheet). When preparing fillers, add the amount of Microsphere required to obtain the level of viscosity needed. For additional information, please request the brochure "Epoxy System Resina 2000".
APPLICATION DATA
Drying time before use: 7 days
Pot life (20°C): 30 mins
Application temperature min/max: +15/+35 °C
Hardener: 6545.999
Mixing ratio by volume: 2:1 (67:33 )
Mixing ratio by weight: 70:30
Thinner: 5610 for cleaning only
Dry film thickness per coat: 100µ
Wet film thickness per coat: 100µ
Theoretical coverage per coat: 10,0 m2/l
Recoating time at 20°C min 10 hrs max 36 hrs
Number of coats: 3-4