• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Stoppani Clipper One Component Enamel 0,75 Lt Creamy White #466COL9006
    Price:
    €24.19
    Listing:
    €32.26
    You Save:
    - 25%
  2. 2
    Stoppani Thinner 277 1 Lt #466COL9200
    Price:
    €6.69
    Listing:
    €8.91
    You Save:
    - 25%
  3. 3
    Veneziani Gummipaint Enamel 0,375 Lt Yellow #473COL1191
    Price:
    €28.82
    Listing:
    €33.90
    You Save:
    - 15%
  4. 4
    Boero Defender Two-Component Epoxy Primer 259 Grey #45100338
    Price:
    €19.98
    Listing:
    €33.31
    You Save:
    - 40%
  5. 5
    Stoppani Clipper Glossy Paint U.V. 0,75 Lt #466COL9036
    Price:
    €19.57
    Listing:
    €26.08
    You Save:
    - 25%

Veneziani Wood Mat Paint 0,75 Lt #473COL216

Veneziani Wood Mat Paint 0,75 Lt #473COL216

A clear, semi-glossy, two-component varnish. Highly resistant to the marine environment. Particularly recommended for the treatment of bulkheads, furniture and all internal wooden surfaces.

Listing:
€50.74
Price:
€43.13
You Save:
€7.61 (15%)
Combination not available

MORE INFORMATION

WOOD MAT VARNISH

HIGH QUALITY
EXCELLENT LEVELLING
VERY DURABLE

CHARACTERISTICS
A clear, semi-glossy, two-component varnish. Highly resistant to the marine environment. Particularly recommended for the treatment of bulkheads, furniture and all internal wooden surfaces. Excellent levelling and resistance to wear. Easy to apply. Not suitable for surfaces which are permanently immersed. Excellent for wooden decking and planking.

TECHNICAL DATA
Curing mechanism: thinner evaporation and chemical reaction
Specific weight: 1,00 ± 0.02 kg/l
Volume solids: 50 %
Flash point: <21°C
Appearance: semi-glossy
Colour: clear
Unit size: 0,75 L

SURFACE PREPARATION
Old stripped wood: sand and clean the surface. Only apply Fibrodur if the wood is very dry.
New wood: sand and remove the dust from the surface. Prime with a coat of Fibrodur. Never apply to wet wood.
High resistance system: on new or stripped wood apply two coats of Resina 2000, sanding between coats.

APPLICATION
Mix the base and pour in the hardener while continuing to stir. Apply a uniform coat with criss-cross strokes. The excellent levelling gives a specular, glossy surface even when applied with a brush. The recommended system is of 4 coats of Wood Mat with 8 hour intervals between coats. For best results sand between coats with fine grade 300/600 abrasive paper. When applied directly onto bare wood the first coat of Wood Mat must be thinned by 20% with Thinner 6780 so that it soaks into the surface. Less thinner must be used for the subsequent coats and no thinner be used for the final coat.

APPLICATION DATA
Drying time before use at 20°C: 3 days
Pot life (20°C): 6 hrs
Application temperature:  min/max: +5/+35 °C
Hardener: 6740.999
Mixing ratio by volume: 1:1
Mixing ratio by weight: 50:50
Thinner: 6780
Wet film thickness per coat: 60 µ
Dry film thickness per coat: 30 µ
Theoretical coverage per coat: 16,7 m2/l
Recoating time at 20°c min 8 hrs  max 48 hrs
Number of coats: 3-4
Spray application data: Conventional/nozzle diameter 1,4/1,7 mm.
Air pressure 2,0/3,0 atm.
Compression ratio:        /