• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Stoppani 910 Polyurethane Paint Sol. B 0,5 Lt Transparent #466COL9115
    Price:
    €18.35
    Listing:
    €24.46
    You Save:
    - 25%
  2. 2
    Stoppani Expansion Thinner 371 0,5 Lt #466COL9203
    Price:
    €8.24
    Listing:
    €10.98
    You Save:
    - 25%
  3. 3
    Stoppani Thinner 277 1 Lt #466COL9200
    Price:
    €6.69
    Listing:
    €8.91
    You Save:
    - 25%
  4. 4
    International Interprotect Primer 2,5 Lt White YPA400 #458COL658
    Price:
    €104.08
    Listing:
    €138.78
    You Save:
    - 25%
  5. 5
    International Perfection Polyurethane Enamel Two Component A+B 2,25 Lt #458COL659
    Price:
    €135.47
    Listing:
    €180.62
    You Save:
    - 25%

Marlin TF Antifouling 0,75 Lt Black #461COL491

Marlin TF Antifouling 0,75 Lt Black #461COL491

Self-polishing antifouling based on special resins, cupric oxide and anti slime agents. Color range: oxide red, black, blue, white and sky blue. It is copper-free and therefore also suitable for boats made of light alloy.

Listing:
€59.11
Price:
€41.38
You Save:
€17.73 (30%)
Combination not available

MORE INFORMATION
Self-polishing antifouling based on special resins, cupric oxide and anti slime agents. 
Color range: oxide red, black, blue, white and sky blue.  
It is copper-free and therefore also suitable for boats made of light alloy. It dissolves in water in a uniform manner and at a controlled rate; the depleted part is continuously moved away from the surface by the effect of motion so that in contact with water there is always a fresh layer present, provided with the maximum activity. In this way the service life of the MARLIN TF is directly proportional to the thickness of the film applied. By applying a proper thickness the hull can remain clean for up to 24 months. MARLIN TF remains effective even on boats berthed for a long time in port. MARLIN TF also has the advantage of maintaining the minimum friction values between water and hull; over time instead, this friction decreases as the product self-levels as it erodes more quickly on areas that protrude. The solubility in water is very well balanced making it suitable also for fast hulls (up to 25 knots). Any eventual cleaning of the hull with brushes and abrasive felt sponges to remove the small amount of slime that forms after a long stop over, shortens the duration of protection, as each cleaning removes some of the thickness.

USE
On fiberglass, apply after degreasing with solvent, sanding and after have applied a coat of FIBERGLASS PRIMER. 
On wood and iron, it should be applied after a suitable cycle of epoxy-based products. 
On hulls that have already been treated with MARLIN TF, the porous surface layer should be removed by strong pressure wash or better still by sanding. 
The same procedure should also be carried out in the cases of other antifouling most of which MARLIN TF is compatible with. 
In case of a very porous surface, or one that is in bad condition, apply a coat of UNIVERSAL PRIMER  diluted with about 20% of THINNER No. 2 before applying MARLIN TF. 
MARLIN TF can be applied by brush, roller or spray; the minimum interval between coats is 8 hours (at 20 ° C); before launching it is necessary to wait until the product is completely dry even in depth; for a thickness of 100-120 microns (2-3 coats) the time required is 24 hours on days of temperate weather and not too humid; for a greater thickness or in case of colder temperatures, the times are longer. 
The product may be exposed to air for up to six months after application. MARLIN TF is suitable for boats made of wood, iron, and plastic.