• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Cfg blue boat grease - 125ml - Code: 454LUB056
    Price:
    €6.46
    Listing:
    €7.17
    You Save:
    - 10%
  2. 2
    Stoppani Epoxy Plus Primer Sol. A 0,675 Lt White #466COL9233
    Price:
    €16.71
    Listing:
    €22.28
    You Save:
    - 25%
  3. 3
    Stoppani Thinner 277 1 Lt #466COL9200
    Price:
    €6.87
    Listing:
    €9.15
    You Save:
    - 25%
  4. 4
    Stoppani Thinner 911 1 Lt #466COL9205
    Price:
    €11.39
    Listing:
    €15.19
    You Save:
    - 25%
  5. 5
    Stoppani Epoxy 70171 Thinner 1 Lt #466COL9208
    Price:
    €9.98
    Listing:
    €13.30
    You Save:
    - 25%

International Danboline 2,5 Lt White YMA102 #458COL694

International Danboline 2,5 Lt White YMA102 #458COL694

Danboline protects bilges, lockers and bulkheads against moisture penetration and wear. Danboline resists oil stains and fuel spillage and cleans easily. Excellent covering power. Wear resistant.

Listing:
€96.69
Price:
€72.52
You Save:
€24.17 (25%)
Combination not available

MORE INFORMATION

APPLICATION AND USE

PREVIOUSLY PAINTED SURFACES: In Good Condition Wash down with Super Cleaner, rinse with fresh water and let dry. Abrade with 180-280 grade paper. In Poor Condition remove all previous coatings and prime the substrate.

PRIMING: All information related to the preparation for bare substrates is shown in the data sheets of the appropriate primer.
BARE WOOD: Prime with Yacht Primer or Interprotect.
STEEL: Prime with Yacht Primer or Interprotect.
ALUMINIUM: Prime with Yacht Primer or Interprotect.
GRP: Wash with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grade paper. Pay particular attention to the surface of molded GRP. It does not require priming.

METHOD
Sand the primer using 180-280 grade wet or dry. Remove any dust with a rag. Apply 1-2 coats.

USEFUL TIPS:
MIXING: Stir well before using.
THINNER: Thinner No.1 (Thinner 910 for spray application)
CLEANING SOLVENT: Thinner No.1
VENTILATION AND HUMIDITY: Apply in a well ventilated and dry environment. Conventional Spray: Pressure: 3-4 bar. Nozzle diameter: 1.2 mm. Dilute to about 20% with Thinner 910. SPRAY APPLICATION - FOR PROFESSIONAL USE ONLY.

OTHER
For added protection against moisture and surface to be treated to prevent osmosis in the bilges, use Gelshield products.

COMPATIBILITY / SUBSTRATES
Suitable for all substrates specified. Only overcoat with one-component paints.

NUMBER OF COATS
1-2 coats

COVERAGE
(Theoretical) 12.3 m²/lt by brush (Practical) 11.0 m/ lt
RECOMMENDED DRY FILM THICKNESS: 40 microns
RECOMMENDED WET FILM THICKNESS: 82 microns

METHODS OF APPLICATION
Brush, Conventional Spray, Roller

  1. 1
    International Thinner No.1 1Lt for thinning or equipment cleaning #458COL6500
    Thinner No.1 is suitable for thinning and/or equipment cleaning in association with: pack paints and varnishes - Yacht Primer, Toplac, Pre-Kote, Interdeck, Danboline, Original, Goldspar, Goldspar Satin, Schooner.
    Price:
    €15.10
    Listing:
    €20.13
    You Save:
    - 25%