• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Marlin Velox Plus Antifouling 0,5 Lt Black #461COL515
    Price:
    €37.15
    Listing:
    €61.92
    You Save:
    - 40%
  2. 2
    Stoppani Two-Component Enamel Glasstop Hardener S31300 Part B 185ml #466COL9073
  3. 3
    Marlin Primepox Epoxy Primer 0.75L Red Oxide for Iron and Alloys #461COL550
    Price:
    €18.15
    Listing:
    €30.26
    You Save:
    - 40%
  4. 5
    International Micron Extra EU Self-polishing Antifouling 5 Lt #458COL1081
    Price:
    €264.90
    Listing:
    €642.33
    You Save:
    - 59%

International Danboline 2,5 Lt Grey YMA100 #458COL693

International Danboline 2,5 Lt Grey YMA100 #458COL693

Danboline protects bilges, lockers and bulkheads against moisture penetration and wear. Danboline resists oil stains and fuel spillage and cleans easily. Excellent covering power. Wear resistant.

Listing:
€96.69
Price:
€72.52
You Save:
€24.17 (25%)
Combination not available

MORE INFORMATION

APPLICATION AND USE

PREVIOUSLY PAINTED SURFACES:
In Good Condition: Wash with Super Cleaner, rinse with fresh water and let dry. Abrade with 180-280 grit paper.
In Poor Condition: Remove all previous coatings and prime the substrate.

PRIMING: All information related to the preparation for bare substrates is set out in the data sheets of the relevant primer.
BARE WOOD: Prime with Yacht Primer or Interprotect.
STEEL: Prime with Yacht Primer or Interprotect.
ALUMINIUM: Prime with Yacht Primer or Interprotect.
GRP: Wash with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grit paper. Pay particular attention to the surface of molded GRP. It does not require priming.

METHOD: Sand the primer using 180-280 grit wet or dry. Remove any dust with a rag. Apply 1-2 coats.

USEFUL TIPS:
MIXING: Stir well before using.
THINNER: Thinner No.1 (Thinner 910 for spray application)
CLEANING SOLVENT: Thinner No.1
CONTROL OF THE FAN AND MOISTURE: Apply in a well ventilated and dry environment.
Conventional Spray: Pressure: 3-4 bar. Nozzle diameter: 1.2 mm. Dilute to about 20% with Thinner 910. SPRAY APPLICATION - FOR PROFESSIONAL USE ONLY.

OTHER: For added protection against moisture and surface to be treated to prevent osmosis in the bilges, use Gelshield products.

COMPATIBILITY / SUBSTRATES: Suitable for all substrates specified. Only overcoat with one-component paints.
NUMBER OF COATS: 1-2 coats
COVERAGE/SPREADING RATE: (Theoretical) 12.3 m² / lt by brush (Practical) 11.0 m² / lt
DRY FILM THICKNESS PER COAT: Recommended 40 microns
WET FILM THICKNESS PER COAT: Recommended 82 microns

METHODS OF APPLICATION: Brush, Conventional Spray, Roller

  1. 1
    International Thinner No.1 1Lt for thinning or equipment cleaning #458COL6500
    Thinner No.1 is suitable for thinning and/or equipment cleaning in association with: pack paints and varnishes - Yacht Primer, Toplac, Pre-Kote, Interdeck, Danboline, Original, Goldspar, Goldspar Satin, Schooner.
    Price:
    €15.10
    Listing:
    €20.13
    You Save:
    - 25%