• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Veneziani Gummipaint Enamel 0,375 Lt Yellow #473COL1191
    Price:
    €28.82
    Listing:
    €33.90
    You Save:
    - 15%
  2. 2
    Triple Gold Paint Roller L. 10 cm D. 41 mm H. 6 mm #478COL1070
    Price:
    €1.92
    Listing:
    €2.26
    You Save:
    - 15%
  3. 3
    Boero Defender Two-Component Epoxy Primer 259 Grey #45100338
    Price:
    €19.98
    Listing:
    €33.31
    You Save:
    - 40%
  4. 4
    Stoppani Clipper Glossy Paint U.V. 0,75 Lt #466COL9036
    Price:
    €19.57
    Listing:
    €26.08
    You Save:
    - 25%
  5. 5
    Hempel Mille NCT Antifouling Black #456COL023
    Price:
    €39.89
    Listing:
    €56.73
    You Save:
    - 30%

International Danboline 0,75 Lt Grey YMA100 #458COL691

International Danboline 0,75 Lt Grey YMA100 #458COL691

Danboline is a hard wearing coating for bilges, lockers and bulkheads and offers protection against moisture penetration and wear. Danboline is resistant to oil and fuel spillage stains and cleans easily. Excellent covering power. Wear resistant.

Listing:
€32.39
Price:
€24.29
You Save:
€8.10 (25%)
Combination not available

MORE INFORMATION

APPLICATION AND USE

PREVIOUSLY PAINTED SURFACES:
In Good Condition: Wash with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-280 grit paper.
In Poor Condition: Remove all previous coatings and prime the substrate.

PRIMING: All information related to the preparation for bare substrates is set out in the data sheets of the relevant primer.
BARE WOOD: Prime with Yacht Primer or Interprotect.
STEEL: Prime with Yacht Primer or Interprotect.
ALUMINIUM: Prime with Yacht Primer or Interprotect.
GRP: Wash with Super Cleaner, rinse with fresh water and let dry. Abrade with 180-220 grit paper. Pay particular attention to the surface of molded GRP. It does not require priming.

METHOD: Sand the primer using 180-280 grit wet or dry. Remove any dust with a rag. Apply 1-2 coats.

USEFUL TIPS:
MIXING: Stir well before using.
THINNER: Thinner No.1 (Thinner 910 for spray application)
CLEANING SOLVENT: Thinner No.1
CONTROL OF VENTILATION AND MOISTURE: Apply in a well ventilated and dry environment.
Conventional Spray: Pressure: 3-4 bar. Nozzle diameter: 1.2 mm. Dilute to about 20% with Thinner 910. SPRAY APPLICATION - FOR PROFESSIONAL USE ONLY.

OTHER: For added protection against moisture and surface to be treated to prevent osmosis in the bilges, use Gelshield products.

COMPATIBILITY / SUBSTRATES: Suitable for all substrates specified. Only overcoat with one-component paints.
NUMBER OF COATS: 1-2 coats
COVERAGE/SPREADING RATE: (Theoretical) 12.3 m² / lt by brush (Practical) 11.0 m² / lt
DRY FILM THICKNESS PER COAT: Recommended 40 microns
WET FILM THICKNESS PER COAT: Recommended 82 microns

METHODS OF APPLICATION: Brush, Conventional Spray, Roller

  1. 1
    International Thinner No.1 1 Lt #458COL6500
    Thinner No.1 is suitable for thinning and / or equipment cleaning in association with: pack paints and varnishes - Yacht Primer, Toplac®, Pre-Kote, Interdeck®, Danboline, Original, Goldspar®, Goldspar Satin, Schooner®.
    Price:
    €14.55
    Listing:
    €19.40
    You Save:
    - 25%