• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Boero Delta 3000 Universal Epoxy Primer #45100345
    Price:
    €19.98
    Listing:
    €33.31
    You Save:
    - 40%
  2. 2
    Stoppani Resolution one-component primer  Lt.0,75 #466COL9177
    Price:
    €18.21
    Listing:
    €24.29
    You Save:
    - 25%
  3. 3
    International Cruiser 200 Bright White 2.5lt Antifouling #458COL1201
    Price:
    €64.90
    Listing:
    €164.70
    You Save:
    - 61%
  4. 4
    Veneziani Thinner 6380 0,5 Lt For Gummipaint Series #473COL254
    Price:
    €10.69
    Listing:
    €12.57
    You Save:
    - 15%
  5. 5
    Stoppani Thinner 6400/D 1 Lt #466COL9209
    Price:
    €7.64
    Listing:
    €10.19
    You Save:
    - 25%

International Primocon Primer 2,5 Lt Grey YPA984 #458COL654

International Primocon Primer 2,5 Lt Grey YPA984 #458COL654

Tar­free, quick drying conventional one ­part primer for all substrates underwater. Suitable for application on all the underwater surfaces, on which an effective anti-corrosive action is also carried out.

Listing:
€100.65
Price:
€75.49
You Save:
€25.16 (25%)
Combination not available

PRODUCT DESCRIPTION

Tar­free, quick drying conventional one ­part primer for all substrates underwater. Can be used under all International antifoulings or as a barrier/sealer coat over incompatible or unknown antifoulings.

* Primocon prevents leaching of TBT from an underlying antifouling coating provided it is applied at a minimum dry film thickness of 80 microns (minimum 2 coats by roller) and that the film remains intact.

PRODUCT INFORMATION
Colour: YPA984­Grey
Finish: Matt
Specific Gravity 1.1
Volume Solids 33%
Typical Shelf Life: 2 yrs
VOC (As Supplied) 584 g/lt
Unit Size: 750 ml, 2.5 lt, 5 lt

DRYING/OVERCOATING INFORMATION
Drying
5°C (41°F) 15°C (59°F) 23°C (73°F) 35°C (95°F)
Touch Dry 1.5 hrs 1 hrs 1 hrs 1 hrs
Overcoating
Substrate Temperature
5°C (41°F) 15°C (59°F) 23°C (73°F) 35°C (95°F)
Overcoated By Min Max Min Max Min Max Min Max
Micron 77 6 hrs 1 mths 3 hrs 1 mths 3 hrs 1 mths 3 hrs 1 mths
Micron Extra EU 6 hrs 1 mths 3 hrs 1 mths 3 hrs 1 mths 3 hrs 1 mths
Micron Optima 24 hrs 1 mths 16 hrs 1 mths 11 hrs 1 mths 8 hrs 1 mths
Micron WA 24 hrs 1 mths 5 hrs 1 mths 3 hrs 1 mths 1 hrs 1 mths
Primocon 3 hrs ext 3 hrs ext 3 hrs ext 3 hrs ext

Note: For all other International antifoulings such as Cruiser Uno EU, Boatguard EU, Ultra EU, Cruiser Polishing Antifouling, Cruiser Premium Plus, Micron Superior, Navigator and Trilux Hard Antifouling, use the Micron Extra EU overcoating times. If maximum overcoating time has been exceeded, sand using 80­180 grit paper. Drying times refer to brush and roller application.

APPLICATION AND USE
Preparation: Wash all surfaces except STEEL with Super Cleaner.
BARE/NATURAL GRP: Sand using 180­-220 grit paper.

NATURAL WOOD/PLYWOOD: Sand smooth with 80­-180 and then 280 grit paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying products recommended for application direct on wood (see specific coating systems).

ALUMINIUM: Degrease with solvent or Super Cleaner. Sand well using 24­-120 grit (aluminium compatible) paper.
Coarser grits are recommended to achieve optimum adhesion. Clean thoroughly and allow to dry. Pre­prime using an
International primer as soon as possible (within 8 hours) as detailed for specific coating systems.

ZINC/GALVANISED STEEL: Degrease with solvent or Super Cleaner. Sand well using 60­-120 grit paper. Clean thoroughly and allow to dry completely. Pre­prime using an International primer as detailed for specific coating systems.

LEAD: Degrease with solvent or Super Cleaner. Sand well using 120 grit paper or power wire brush. Clean thoroughly and allow to dry. Pre­prime using an International primer as detailed for specific coating systems.

STEEL: Gritblast to Sa 2½ ­ near white metal surface. If gritblasting is not possible, grind the metal surface with 24­36 grit abrasive discs to a uniform, clean, bright metal surface with a 50-­75 microns anchor pattern. Use angle grinder on small areas. Pre­prime with Primocon thinned 10­-15% with Thinners No.3.

PREVIOUSLY ANTIFOULED SURFACE
In Good Condition: Remove loose material. Wash with fresh water. Allow to dry.
In Poor Condition: Remove using Interstrip.

Method: If filling is required, use appropriate filler after the first coat of Primocon has been applied. Before painting, remove any dust with a dust cloth. Apply the following number of coats: GRP ­ 1, Wood/Plywood ­ 3, Aluminium/Alloy/Zinc/Galvanised Steel/Lead/Steel ­ 5, Barrier/Sealer coat ­ 1.

Useful Tips: Mixing: Stir well before use. Thinner YTA085 Thinners No.3 GTA007.
Cleaner YTA085 Thinners No.3
Airless Spray Pressure: 211 bar. Nozzle diameter: 2180­-2680.

Some Important Points: Do not use below 5°C. Do not overcoat with 2-­component products. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Substrate temperature should be 3°C/5°F above dew point and maximum 35°C/95°F. Under certain application conditions it may not be possible to achieve 40 microns dry film thickness in a single coat application. For application to GRP a single coat of Primocon is suitable providing that the dry film thickness is 20 microns or above. For other substrates further coats than that stated should be applied to ensure adequate film thickness is applied for protection of the substrate. Primocon prevents leaching of TBT from an underlying antifouling dry film thickness of 80 microns (minimum of 2 coats by roller).

Compatibility/Substrates: Suitable for all substrates specified.
Number of Coats: 1­5 by brush depending on substrate
Coverage/spreading rate (Theoretical) ­ 8.33 m²/lt
(Practical) ­ 7.4 m²/lt by brush
Recommended dry film thickness (DFT) per coat 40 microns
Recommended wet film thickness (WFT) per coat 121 microns
Application Methods: Airless Spray, Brush, Roller

TRANSPORTATION, STORAGE AND SAFETY INFORMATION
Storage: GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For full shelf life of VC Tar2, ensure that the container is firmly closed between uses and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.


TRANSPORTATION:
Primocon should be kept in securely closed containers during transport and storage.

Safety GENERAL:
Read the label safety section for Health and Safety Information.
Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.

DISPOSAL:
Remainders of Primocon cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for with local authorities.

IMPORTANT NOTES: The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further enquiries as to the suitability of the product for the intended purpose does so at his own risk.

  1. 1
    International Thinner No.3 1 Lt #458COL652
    Thinner No.3 is suitable for diluting Antifouling Coating, hulls and other special products
    Price:
    €15.65
    Listing:
    €20.86
    You Save:
    - 25%