• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Veneziani Timber Gloss Paint 0,75 Lt #473COL195
    Price:
    €18.75
    Listing:
    €22.06
    You Save:
    - 15%
  2. 2
    Rotaschaum extra fine paint Roller  L. 11 cm D. 35 mm H. 6 mm #478COL1065
    Price:
    €1.30
    Listing:
    €1.53
    You Save:
    - 15%
  3. 3
    Boero Thinner 703 0,5 Lt Thinner for one-component products #45100705
    Price:
    €3.40
    Listing:
    €5.67
    You Save:
    - 40%
  4. 4
    International Perfection Plus Varnish 0,75 Lt Transparent YVA950 #458COL685
    Price:
    €43.03
    Listing:
    €57.36
    You Save:
    - 25%
  5. 5
    Veneziani Thinner 6470 0,5 Lt #473COL253
    Price:
    €7.30
    Listing:
    €8.58
    You Save:
    - 15%

International Primocon Primer 0,75 Lt Grey YPA984 458COL653

International Primocon Primer 0,75 Lt Grey YPA984 458COL653

Primer conventional tar free, quick drying. Suitable for application on all the underwater surfaces, on which also carries out an effective anti-corrosive action.

Listing:
€36.14
Price:
€27.11
You Save:
€9.03 (25%)
Combination not available

PRODUCT DESCRIPTION

Tar­free, quick drying conventional one­part primer for all substrates underwater. Can be used under all International antifoulings or as a barrier/sealer coat over incompatible or unknown antifoulings. 

* Primocon prevents leaching of TBT from an underlying antifouling coating provided it is applied at a minimum dry film thickness of 80 microns (minimum 2 coats by roller) & that the film remains intact.

PRODUCT INFORMATION
Colour YPA984­Grey
Finish Matt
Specific Gravity 1.1
Volume Solids 33%
Typical Shelf Life 2 yrs
VOC (As Supplied) 584 g/lt
Unit Size 750 ml, 2.5 lt, 5 lt

DRYING/OVERCOATING INFORMATION
Drying
5°C (41°F) 15°C (59°F) 23°C (73°F) 35°C (95°F)
Touch Dry 1.5 hrs 1 hrs 1 hrs 1 hrs
Overcoating
Substrate Temperature
5°C (41°F) 15°C (59°F) 23°C (73°F) 35°C (95°F)
Overcoated By Min Max Min Max Min Max Min Max
Micron 77 6 hrs 1 mths 3 hrs 1 mths 3 hrs 1 mths 3 hrs 1 mths
Micron Extra EU 6 hrs 1 mths 3 hrs 1 mths 3 hrs 1 mths 3 hrs 1 mths
Micron Optima 24 hrs 1 mths 16 hrs 1 mths 11 hrs 1 mths 8 hrs 1 mths
Micron WA 24 hrs 1 mths 5 hrs 1 mths 3 hrs 1 mths 1 hrs 1 mths
Primocon 3 hrs ext 3 hrs ext 3 hrs ext 3 hrs ext

Note: For all other International antifoulings such as Cruiser Uno EU, Boatguard EU, Ultra EU, Cruiser Polishing Antifouling, Cruiser Premium Plus, Micron Superior, Navigator and Trilux Hard Antifouling, use the Micron Extra EU overcoating times. If maximum overcoating time has been exceeded, sand using 80­180 grade (grit) paper. Drying times refer to brush and roller application.

APPLICATION AND USE
Preparation Wash all surfaces except STEEL with Super Cleaner. 
BARE GRP Sand using 180­220 grade (grit) paper. 
BARE WOOD/PLYWOOD Sand smooth with 80­180 and then 280 grade paper. Remove sanding dust by brushing,dusting and wiping. If wiping with solvent then allow to dry completely before applying products recommended for application direct to wood (see specific coating systems).
ALUMINIUM Degrease with solvent or Super Cleaner. Sand well using 24­120 grade (aluminium compatible) paper.
Coarser grades are recommended to achieve optimum adhesion. Clean thoroughly and allow to dry. Pre­prime using an
International primer as soon as possible (within 8 hours) as detailed for specific coating systems. 

ZINC/GALVANISED STEEL Degrease with solvent or Super Cleaner. Sand well using 60­120 grade paper. Clean thoroughly and allow to dry completely. Pre­prime using an International primer as detailed for specific coating systems. 

LEAD Degrease with solvent or Super Cleaner. Sand well using 120 grade paper or power wire brush. Clean thoroughly and allow to dry. Pre­prime using an International primer as detailed for specific coating systems.

STEEL Gritblast to Sa 2½ ­ near white metal surface. If gritblasting is not possible, grind the metal surface with 24­36 grit abrasive discs to a uniform, clean, bright metal surface with a 50­75 microns anchor pattern. Use angle grinder on small areas. Pre­prime with Primocon thinned 10­15% with Thinners No.3. 

PREVIOUSLY ANTIFOULED SURFACE
In Good Condition Remove loose material. Wash down with fresh water. Allow to dry. 
In Poor Condition Remove using Interstrip.
Method If filling is required, use appropriate filler after the first coat of Primocon has been applied. Before painting, remove any dust with a dust wipe. Apply the following number of coats: GRP ­ 1, Wood/Plywood ­ 3, Aluminium/Alloy/Zinc/Galvanised Steel/Lead/Steel ­ 5, Barrier/Sealer coat ­ 1.
Hints Mixing Stir well before use. Thinner YTA085 Thinners No.3 GTA007. 
Cleaner YTA085 Thinners No.3 
Airless Spray Pressure: 211 bar. Tip Size: 2180­2680. 
Some Important Points Do not use below 5°C. Do not overcoat with 2­component products. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Substrate temperature should be 3°C/5°F above dew point and maximum 35°C/95°F. Under certain application conditions it may not be possible to achieve 40 microns dry film thickness in a single coat application. For application to GRP a single coat of Primocon is suitable providing that the dry film thickness is 20 microns or above. For other substrates further coats than that stated should be applied to ensure adequate film thickness is applied for protection of the substrate. Primocon prevents leaching of TBT from an underlying antifouling dry film thickness of 80 microns (minimum of 2 coats by roller).
We have studied the leaching rate of TBT from a TBT SPC antifouling (Superyacht 900) overcoated with Primocon (applied as specified) & seen that TBT leaching is prevented. The leaching rate determination method used was ASTM D5108­90 (2002) Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water.
Compatibility/Substrates Suitable for all substrates specified.
Number of Coats 1­5 by brush depending on substrate
Coverage (Theoretical) ­ 8.33 m²/lt
(Practical) ­ 7.4 m²/lt by brush
Recommended DFT per coat 40 microns dry
Recommended WFT per coat 121 microns wet
Application Methods Airless Spray, Brush, Roller

TRANSPORTATION, STORAGE AND SAFETY INFORMATION

Storage GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of Primocon to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight. 

TRANSPORTATION:
Primocon should be kept in securely closed containers during transport and storage.

Safety GENERAL:
Read the label safety section for Health and Safety Information, also available from our Technical Help Line.
Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.

DISPOSAL:
Remainders of Primocon cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.

IMPORTANT NOTES The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at their own risk and we can accept no responsibility for the performance of the product or for any loss or damage (other than death or personal injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.

  1. 1
    International Thinner No.3 1 Lt #458COL652
    Thinner No.3 is suitable for diluting Antifouling Coating, hulls and other special products
    Price:
    €15.65
    Listing:
    €20.86
    You Save:
    - 25%