• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Stoppani 910 Polyurethane Paint Sol. B 0,5 Lt Transparent #466COL9115
    Price:
    €18.35
    Listing:
    €24.46
    You Save:
    - 25%
  2. 2
    Stoppani Expansion Thinner 371 0,5 Lt #466COL9203
    Price:
    €8.24
    Listing:
    €10.98
    You Save:
    - 25%
  3. 3
    Stoppani Thinner 277 1 Lt #466COL9200
    Price:
    €6.69
    Listing:
    €8.91
    You Save:
    - 25%
  4. 4
    International Interprotect Primer 2,5 Lt White YPA400 #458COL658
    Price:
    €104.08
    Listing:
    €138.78
    You Save:
    - 25%
  5. 5
    International Perfection Polyurethane Enamel Two Component A+B 2,25 Lt #458COL659
    Price:
    €135.47
    Listing:
    €180.62
    You Save:
    - 25%

International VC Offshore High Performance Antifouling 0,75 Lt White Dover YBB710 #458COL301

International VC Offshore High Performance Antifouling 0,75 Lt  White Dover YBB710 #458COL301

VC Offshore EU is an antifouling effective even in high fouling conditions, suitable for sailboats and motorboats. Quick drying to form a hard and smooth paint film, easy to clean and sand.

Listing:
€110.26
Price:
€64.90
You Save:
€45.36 (41%)
Combination not available

International Antifouling VC Offshore High Performance 0,75 Lt  White

VC Offshore EU is an antifouling effective even in high fouling conditions, suitable for sailboats and motorboats. Quick drying to form a hard and smooth paint film, easy to clean and sand.

APPLICATION AND USE
Preparation:
VC OFFSHORE: Wash thoroughly with freshwater.
OTHER ANTIFOULINGS: Check for sound condition.
BARE GRP: Use VC General Thinner to clean and fully degrease the surface.  Lightly sand with 240 grit paper. Rinse with fresh water and allow to dry.  Use VC Tar2 to prime and protect against osmosis.
STEEL: Prime with VC Tar2 to prevent corrosion.
LEAD: Prime with VC Tar2.
WOOD: Prime with Primocon.

Useful Tips:
Mixing: Stir well before use. Pour the dry ingredients (stored under the plastic cap). Stir or shake thoroughly.
Cleaner: YTA600 VC General Thinner.
Airless Spray Pressure: 176-210 bar. Nozzle diameter: 1880-2180.
Conventional Spray Pressure: 2-3 bar. Nozzle diameter: 1,5-1,8 mm.
Other: For Airmix spray application: Pressure. 2 bar. Nozzle diameter: 20-113.

Some Important Points.
The color will develop after immersion. It is important to use the quantity calculated on the basis of the indications of the spreading rate, and if necessary applying an extra coat. It is also important to apply the correct thickness for the best results. To prevent poor results, ensure the correct amount of paint is applied using the coverage / spreading rate as a guide.  Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F.  The ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F.  The surface temperature should be minimum 1°C above dew point and maximum 35°C.

Compatability/Substrates
GRP, Wood, Steel/Iron, Lead. Not suitable for use over aluminum/light alloys or zinc-plates surfaces.

Number of Coats
Apply 2 coats per season.  Apply an extra coat in areas subjected to greater wear such as rudders, sterndrives, keels, walk areas etc. 

Coverage / spreading rate
(Theoretical) 11.7 m²/lt by roller - (Practical) 10.5 m²/lt by roller
Dry film thickness: Recommended per coat: 30 microns, by roller
Wet film thickness: Recommended per coat:  83 microns, by roller

Methods of application
Airless spray, conventional spray, roller

  1. 1
    International VC General Thinner 1 Lt #458COL305
    VC® General Thinner is specifically formulated to dilute all products VC® if necessary and clean application equipment.
    Price:
    €26.63
    Listing:
    €35.50
    You Save:
    - 25%
  2. 2
    International VC Tar2 Primer 2,5 Lt #458COL306
    VC Tar2 is a 2-component epoxy primer providing osmosis protection to GRP boats and anticorrosive protection to steel and alloy surfaces. For use below water only.
    Price:
    €102.94
    Listing:
    €137.25
    You Save:
    - 25%
  3. 3
    International VC Tar2 Primer 1 Lt #458COL307
    VC Tar2 is a 2-component epoxy primer providing osmosis protection to GRP boats and anticorrosive protection to steel and alloy surfaces. For use below water only.
    Price:
    €57.25
    Listing:
    €60.27
    You Save:
    - 5%
  4. 4
    International Primocon Primer 0,75 Lt Grey YPA984 458COL653
    Primer conventional tar free, quick drying. Suitable for application on all the underwater surfaces, on which also carries out an effective anti-corrosive action.
    Price:
    €27.11
    Listing:
    €36.14
    You Save:
    - 25%
  5. 5
    International Primocon Primer 2,5 Lt Grey YPA984 #458COL654
    Tar­free, quick drying conventional one ­part primer for all substrates underwater. Suitable for application on all the underwater surfaces, on which an effective anti-corrosive action is also carried out.
    Price:
    €75.49
    Listing:
    €100.65
    You Save:
    - 25%
  6. 6
    International Gelshield 200 Osmosis Treatment A+B 0,75 Lt Green YPA212 #458COL677
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used down to 5 ° C.
    Price:
    €44.90
    Listing:
    €63.96
    You Save:
    - 30%
  7. 7
    International Gelshield 200 Osmosis Treatment A+B 2,5 Lt Green YPA212 #458COL678
    Epoxy primer fast drying and easy to apply, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used down to 5 ° C.
    Price:
    €99.90
    Listing:
    €190.93
    You Save:
    - 48%
  8. 8
    International Gelshield 200 Osmosis Treatment A+B 0,75 Lt Grey #458COL679
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used even at 5 ° C.
    Price:
    €44.90
    Listing:
    €63.96
    You Save:
    - 30%
  9. 9
    International Gelshield 200 Osmosis Treatment A+B 2,5 Lt Grey #458COL680
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used even at 5 ° C.
    Price:
    €99.90
    Listing:
    €190.93
    You Save:
    - 48%