• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Boero Altura UV Glossy Varnish #45100600
    Price:
    €7.42
    Listing:
    €12.36
    You Save:
    - 40%
  2. 2
    Boero Thinner 703 0,5 Lt Thinner for one-component products #45100705
    Price:
    €3.40
    Listing:
    €5.67
    You Save:
    - 40%
  3. 3
    Rotaschaum extra fine paint Roller  L. 11 cm D. 35 mm H. 6 mm #478COL1065
    Price:
    €1.30
    Listing:
    €1.53
    You Save:
    - 15%
  4. 4
    Boero Bise Two-component Textured Polyurethane Enamel #45100435
    Price:
    €21.14
    Listing:
    €35.23
    You Save:
    - 40%
  5. 5
    Stoppani Teak Life Whitener 1 Lt #466COL9199
    Price:
    €12.58
    Listing:
    €16.78
    You Save:
    - 25%

Hempel Light Primer 0,75 Lt Grey #456COL030

Hempel Light Primer 0,75 Lt Grey #456COL030

High build two-component epoxy primer. It forms a hard, tough coating and is resistant to water and petroleum products. Recommended as a primer above and below the waterline.

Listing:
€35.23
Price:
€26.43
You Save:
€8.81 (25%)
Combination not available

MORE INFORMATION

LIGHT PRIMER

High build two-component epoxy primer. It forms a hard covering, tough and resistant to water and petroleum products. Recommended as a primer above and below the waterline for aluminum boats, fiberglass, plywood, steel and ferro-cement. Also suitable for the prevention and repair of osmotic blistering in fiberglass boats and for the protection of the hulls and rudders.

DESCRIPTION:

HEMPEL'S LIGHT PRIMER 45551 is a high build two-component polyamide epoxy primer. It forms a hard, tough coating and is resistant to water and petroleum products.

RECOMMENDED USE:

As a primer above and below the waterline for aluminum, fiberglass, plywood, steel and ferro-cement boats. Also suitable for the prevention and repair of osmotic blistering in fiberglass boats and for the protection of the hulls and rudders.


PHYSICAL CONSTANTS:
Base
Colour / Reference: White / 11630
Finish: Matt
Volume solids,%: 52 ± 1
Theoretical coverage: 5.2 m² / litre at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg / litre
Touch dry: 3-4 hours at 20 ° C
Full curing: 7 days at 20 ° C
V.O.C .: 445 g / litre
Catalyst
Colour / Reference: Grey / 12170
Finish: Matt
Volume solids,%: 51 ± 1
Theoretical coverage: 5.1 m² / litre at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg / litre
Touch dry: 3-4 hours at 20 ° C
Full curing: 7 days at 20 ° C
V.O.C .: 450 g / Litre
The physical constants stated are obtained from the formulas approved by Hempel. They are subject to normal manufacturing tolerances and where stated, to standard deviation according to ISO 3534-1.

APPLICATION DETAILS:

Mixing ratio: Base 45559: Curing agent 95360 2: 1 by volume
Method of application: spray Air Spray HVLP gravity fed conventional suction pressure
Nozzle diameter: 1.6-1.8 mm 1.4-1.8 mm 1.4-1.8 mm 1.4-1.8 mm
Nozzle pressure: 0.7 bar 5 bar 5 bar 5 bar Airless spray Brush
Thinner (max. Vol.): 0845 (5%) 0845 (5%)
Pot life: 2 hours at 20 ° C 6 hours at 20 ° C
Nozzle diameter: .019 "-.023"
Nozzle pressure: 175 bar / 2450 psi (Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S THINNER 0845 - HEMPEL'S DEGREASER 99611
Recommended dry film thickness: 100 micron
Recommended wet film thickness: 200 microns
Recoat inginterval: (See APPLICATION INSTRUCTIONS)
For surface preparation, application conditions, and the subsequent and previous coats -see notes set out in the specifications.

  1. 1
    Hempel Thinner 845 0,75 Lt #456COL036
    Thinner for epoxy products.
    Price:
    €10.98
    Listing:
    €14.64
    You Save:
    - 25%