• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Boero Altura UV Glossy Varnish #45100600
    Price:
    €7.42
    Listing:
    €12.36
    You Save:
    - 40%
  2. 2
    Boero Thinner 703 0,5 Lt Thinner for one-component products #45100705
    Price:
    €3.40
    Listing:
    €5.67
    You Save:
    - 40%
  3. 3
    Rotaschaum extra fine paint Roller  L. 11 cm D. 35 mm H. 6 mm #478COL1065
    Price:
    €1.30
    Listing:
    €1.53
    You Save:
    - 15%
  4. 4
    Boero Bise Two-component Textured Polyurethane Enamel #45100435
    Price:
    €21.14
    Listing:
    €35.23
    You Save:
    - 40%
  5. 5
    Stoppani Teak Life Whitener 1 Lt #466COL9199
    Price:
    €12.58
    Listing:
    €16.78
    You Save:
    - 25%

Boero Futura Two-component Polyurethane Glossy Enamel #45100405

Boero Futura Two-component Polyurethane Glossy Enamel #45100405

Polyurethane acrylic enamel characterized by its exceptional resistance to UV rays and other marine environmental factors. It stand out for its optimal visual qualities such as brightness, whiteness and resistance to abrasion and washing.

Listing:
€57.83
Price:
€34.70
You Save:
€23.13 (40%)
Combination not available

BOERO FUTURA TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL

Polyurethane acrylic enamel characterized by its exceptional resistance to UV rays and other marine environmental factors. It stand out for its optimal visual qualities such as brightness, whiteness and resistance to abrasion and washing.

PHYSICAL ASPECTS (at 20° C)

Aspect: Glossy
Colour: White .001 and colour card
Volume solid % : 50 ± 2 %
Specific weight: 1,1 ÷ 1,24 g/cm³
Flash point: 30 °C
Viscosity: 70" DIN 4 at 20° C

APPLICATION DETAILS

Mixing ratio by volume: 3:1
Pot life: 3 - 5 h depending on temperature
Thinner: Temp. < 18° C – 696.000 Temp. > 18° C – 697.000
Spraying viscosity: 14” – 16” DIN 4 at 20° C
Application Method
Conventional: Gun: 1,4 mm Pressure: 3,5 bar  2 coats wet on wet = 50 μ dry
Mixed air:  Ban: 0,7 mm – 1 mm Pressure: 3,5 bar N°2 coats  wet on wet = 50 μ dry
Thinner: 697
Dry film thickness: Standard range of application  40 μ - 50 μ (Recommended 50 μ)
Wet film thickness: Standard range of application   80 μ - 100 μ (Recommended 100 μ)
Theoretical coverage m2/litro:  Range of application at recommended thickness 10
Primers recommended: Delta UC HB – Admiral UC – Epoply – Challenger HS UC


Note: The product is provided in two tins to be mixed entirely and carefully before use. The eventual dilution must be done after mixing the two components. The physical data of two-component products relate to the components after they have been mixed together.

SURFACE PREPARATION

Sand the cleaned and properly prepared surfaces with sanding paper P320-400 (dry sandpaper). Before painting make sure that all the surfaces to be treated are completely dry, cleaned, oil-free and without grease or other contaminant factors. Apply the top coat on compatible undercoats with appropriate and uniform colours.
New Fiberglass: dewaxed/degreased with SIRIO before proceeding with the preparation and sanding.

APPLICATION CONDITIONS

To avoid the formation of condensation, the temperature of the surface should be at least 3 °C above dew point. During the application and curing the min. ambient temperature should be 10 °C, or higher than 30° C; substrate temperature must not be lower than 5° C since curing is reduced at lower temperatures. Application is not advisable when relative humidity exceeds 80%. The thermo-hygrometric survey should be carried out near the surface to be coated. It is important to be sure there is sufficient ventilation when the application takes place in closed areas.

SAFETY RULES

In order to protect personal health it is advisable to comply with the EU DPR 303 and 547 regulations. Avoid, for example any contact of the product with the skin and eyes. Use in well ventilated areas,in enclosed areas use aspirators, fans and air ventilators. Wear masks, goggles, gloves while applying the product.

NOTE

The applied product must not come in contact with water, chemical products or submitted to mechanical stress before the curing is completed. The wet film thickness is referring to an undiluted product. In case of dilution, this value increases.

  1. 1
    Boero Epoply Undercoat Epoxy Filler #45100400
    Undercoat epoxy filler for use in two-component cycles of topsides. Excellent compact film thanks to excellent flow; easy to sand and provides a perfect surface finish.
    Price:
    €19.98
    Listing:
    €33.31
    You Save:
    - 40%
  2. 2
    Boero Delta UC HB Two-component Epoxy Primer #45100310
    Boero Delta UC HB High thickness two-component epoxy primer for epoxy and polyurethanes which, due to its remarkable quality of protection, resistance and adhesion, can be used on surfaces above and below the waterline of the boat.
    Price:
    €19.98
    Listing:
    €33.31
    You Save:
    - 40%