• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    International Yacht Primer 0,75 Lt Grey YPA275 #458COL1095
    Price:
    €26.08
    Listing:
    €34.77
    You Save:
    - 25%
  2. 2
    International Danboline 2,5 Lt White YMA102 #458COL694
    Price:
    €69.77
    Listing:
    €93.03
    You Save:
    - 25%
  3. 3
    International Thinner No.1 1 Lt #458COL6500
    Price:
    €14.55
    Listing:
    €19.40
    You Save:
    - 25%
  4. 4
    Veneziani Resin 2000 A+B 1,5 Lt #473COL226
    Price:
    €60.61
    Listing:
    €75.76
    You Save:
    - 20%
  5. 5
    Stoppani Super Yacht One Component Paint 1 Lt Honey #466COL9246
    Price:
    €19.17
    Listing:
    €25.56
    You Save:
    - 25%

Stoppani Stopdeck Filler Sol. A 9 Lt #466COL9248

Stoppani Stopdeck Filler Sol. A 9 Lt #466COL9248

Two-component epoxy filler medium specific weight for leveling of large surfaces, in particular for undercoating in decks. Has very long workability.

Listing:
€276.70
Price:
€207.52
You Save:
€69.17 (25%)
Combination not available

MORE INFORMATION

Two-component epoxy filler medium specific weight for leveling of large surfaces, in particular for undercoating in decks. Has  very long workability.

NATURE AND USE

Suitable for leveling large surfaces on boats and in particular for undercoating in decks. It can be applied at high thicknesses on structures in iron, aluminum, wood, fiberglass and cement-gelcoat, after appropriate priming.

Special features: very long workability and no shrinkage.

TECHNICAL FEATURES

BASE (Part A)

Type of binder: Epoxy
Viscosity (at 20 ° C): Pasty thixotropic
Specific weight kg / l 0.700 ± 0.050
Solid content: (mass): 99 +/- 1% (A + B)
Solid content: (volume) 99% +/- 1 (A + B)
Flash point:> 65 ° C
Grey Colour
Mixture ratio: by weight: 87 by volume: 90
Pot life at 20 ° C: about 2 hours

HARDENER (Part B)

Binding Agent: polyamine
Viscosity (at 20 ° C): Pasty thixotropic
Specific weight kg / l 0.950 ± 0.040
Solid content: (mass): 99 +/- 1% (A + B)
Solid content: (volume) 99% +/- 1 (A + B)
Flash point:> 65 ° C
Blue color
Mixture ratio: by weight: 13 by volume: 10
Pot life at 20 ° C: about 2 hours

Mix the two components well prior to application to obtain a uniform color

PLEASE NOTE

Increases in temperature cause reduced pot life.

SUPPORT

Aluminum and alloys:

The surface must be thoroughly degreased with solvent and abraded to allow a light and perfect adhesion of the primer EPOSTOP 937. After a drying phase of at least 12 hours after sanding, apply STOPDECK to the desired thickness.

Iron:

Sandblasting SA 2½ - 3. Apply one coat of EPOXY ZINC followed by a coat of EPOXY PLUS. Proceed as above after sanding.

Wood:

Sand and dust, apply a coat of PRIMER Epoblok followed by a coat of EPOXY PLUS. Proceed as above after sanding.

Gelcoat and fiberglass:

Degrease and sand, after dusting, apply one coat of EPOXY PLUS. After minimum 16 hours, maximum 48 (after 48 hours it is advisable to sand down), apply STOPDECK.

Cement:

Remove the brittle parts, apply a coat of Epoxy ANTIDUST. Apply STOPDECK.

APPLICATION

Application: Spatula
Dilution: Ready to use
Tools cleaning: EPOXY THINNER
Drying: Touch dry in 24 to 36 hours at 20 ° C Recoat 36-48 hours
Application temperature: ° C between +10 and + 35 ° C
Relative humidity:% Not more than 80%
Spreading rate: m2 / l for each about 1 mm thick
Film thickness: no more than 2 cm per coat

NOTE:

This product requires a catalyst.