• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Boero Delta 3000 Universal Epoxy Primer #45100345
    Price:
    €19.98
    Listing:
    €33.31
    You Save:
    - 40%
  2. 2
    Stoppani Resolution one-component primer  Lt.0,75 #466COL9177
    Price:
    €18.21
    Listing:
    €24.29
    You Save:
    - 25%
  3. 3
    International Cruiser 200 Bright White 2.5lt Antifouling #458COL1201
    Price:
    €64.90
    Listing:
    €164.70
    You Save:
    - 61%
  4. 4
    Veneziani Thinner 6380 0,5 Lt For Gummipaint Series #473COL254
    Price:
    €10.69
    Listing:
    €12.57
    You Save:
    - 15%
  5. 5
    Stoppani Thinner 6400/D 1 Lt #466COL9209
    Price:
    €7.64
    Listing:
    €10.19
    You Save:
    - 25%

International Micron Extra EU Self-polishing Antifouling 5 Lt #458COL1081

International Micron Extra EU Self-polishing Antifouling 5 Lt #458COL1081

Micron Extra EU is self-polishing antifouling that provides 24 months of protection with application of 3-4 coats. Biolux® technology optimizes the biocide power giving an "extra" protection even in areas of high fouling.

Listing:
€617.32
Price:
€259.90
You Save:
€357.42 (58%)
Combination not available

PRODUCT DESCRIPTION

Micron Extra EU is self-polishing antifouling that provides 24 months of protection with application of 3-4 coats. Biolux® technology optimizes the biocide power giving an "extra" protection even in areas of high fouling.

* Premium performance - extra strength formula
* Haul and relaunch without repainting
* Polishing System - avoids paint build up
* Can be applied up to 12 months before launch.

PRODUCT INFORMATION
Colour: YBA904-Dover White, YBA920-Blue, YBA924-Green , YBA929-Navy, YBA944-Red , YBA964-Grey, YBA994-Black
Finish: Matt
Specific Gravity 1.9
Volume Solids 60% average
Typical Shelf Life: 2 yrs
VOC (As Supplied) 350 g/lt
Unit Size: 750 ml, 2.5 Lt

DRYING/OVERCOATING INFORMATION
Drying
5°C (41°F)  15°C (59°F)  23°C (73°F)  35°C (95°F)
Touch Dry 1 hrs 45 mins 30 mins 20 mins
Immersion 24 hrs 12 hrs 8 hrs 6 hrs
Note: Max. Immersion Times are as follows: 5-35°C - 12 months
Overcoating
Substrate Temperature
5°C (41°F)  15°C (59°F)  23°C (73°F)  35°C (95°F)
Overcoated By Min Max Min Max Min Max Min Max
Micron Extra 16 hrs ext 10 hrs ext 6 hrs ext 4 hrs ext

APPLICATION AND USE
Preparation: PREVIOUSLY ANTIFOULED SURFACE
In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use close high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with 80-120 grit paper. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.
In Poor Condition: Remove all loosely adhering and flaking material and sand all areas. Areas taken back to substrate should be treated as for new. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.

PRIMING: For suitable primers, consult Yachtpaint.com or contact your local International Paint Representative.
NATURAL GRP: Degrease with solvent or suitable detergent cleaner. Sand well using 180-220 grit paper. Clean thoroughly and allow to dry completely. Pre-prime using an International primer as detailed for specific coating systems.
STEEL: Degrease with solvent or suitable detergent cleaner. Clean thoroughly and allow to dry completely. Pre-prime using an International primer as soon as possible (within 8 hours) as detailed for specific coating systems.
LEAD: Degrease with solvent or suitable detergent cleaner. Sand well using 120 grit paper or power wire brush.
Clean thoroughly and allow to dry. Pre-prime using an International primer as detailed for specific coating systems.
NATURAL WOOD/PLYWOOD: Sand smooth with 80-180 grit paper and then 280 grit paper. Remove sanding dust by brushing, dusting and wiping, or other suitable method. Clean thoroughly and ensure surface is dry. Prime using an International primer as detailed for specific coating systems.

Method: Apply 2 coats per season on the hull. 3 coats are required on the leading and trailing edges, waterline, rudder and keel.
This is important for best performance. If a 2 seasons protection is required, apply 3 coats on the hull and 4 coats on the leading and trailing edges, waterline, rudder and keel. The more product is applied, the longer the antifouling protection. The boat can be left out of the water after application of the antifouling for up to 12 months before launching.
Useful tips: Mixing: Stir well before use Thinner YTA085 Thinners No.3
Thinning is not recommended.
Cleaner YTA085 Thinners No.3
Airless Spray Pressure: 176-210 bar. Nozzle diameter: 2180.
Other: For Airmix spray application: Pressure: 2.5 bar. Nozzle diameter: 20-113. True colour will develop after immersion. It is important to apply the product quantity calculated on the basis of the spreading rate, and if necessary with an extra coat.  It is also important to respect the thicknesses as advised to obtain the best results.
Some Important Points: To prevent premature failure, ensure the correct amount of paint is applied using the coverage/spreading rate as a guide. Product temperature should be minimum -5°C and maximum 35°C. Ambient temperature should be minimum -5°C and maximum 35°C. Substrate temperature should be minimum 1°C above dew point and maximum 35°C.

Compatibility/Substrates
GRP, wood, steel/iron, lead. Not suitable for use over aluminium/alloy substrates or zinc-plated surfaces. Can be applied directly over most types of antifoulings, provided they are in sound condition
Number of Coats: 2-3 by brush/roller
Coverage/spreading rate (Theoretical) - 10.0 m²/lt by brush; 3.0 m²/lt by spray.
Recommended dry fiilm thickness per coat 60 microns
Recommended wet film thickness per coat 100 microns wet
Application Methods Airless Spray, Brush, Airmix, Roller

TRANSPORTATION,STORAGE AND SAFETY INFORMATION
Storage GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of Micron Extra to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.

TRANSPORTATION:
Micron Extra should be kept in securely closed containers during transport and storage.

Safety GENERAL:
Contains biocides. Antifoulings should only be wet sanded. Never dry sand or burn-off old antifoulings. Read the label safety section for Health and Safety Information.

DISPOSAL:
Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
Remainders of Micron Extra cannot be disposed of through the municipal waste route or dumped without permit.
Disposal of remainders must be arranged for with local authorities.

IMPORTANT NOTES The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further enquiries as to the suitability of the product for the intended purpose does so at his own risk.

  1. 1
    International Thinner No.3 1 Lt #458COL652
    Thinner No.3 is suitable for diluting Antifouling Coating, hulls and other special products
    Price:
    €15.65
    Listing:
    €20.86
    You Save:
    - 25%
  2. 2
    International Primocon Primer 0,75 Lt Grey YPA984 458COL653
    Primer conventional tar free, quick drying. Suitable for application on all the underwater surfaces, on which also carries out an effective anti-corrosive action.
    Price:
    €27.11
    Listing:
    €36.14
    You Save:
    - 25%
  3. 3
    International Primocon Primer 2,5 Lt Grey YPA984 #458COL654
    Tar­free, quick drying conventional one ­part primer for all substrates underwater. Suitable for application on all the underwater surfaces, on which an effective anti-corrosive action is also carried out.
    Price:
    €75.49
    Listing:
    €100.65
    You Save:
    - 25%
  4. 4
    International Interprotect Primer 0,75 Lt Grey YPA403 #458COL655
    High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling tie coat for use over epoxy primers.
    Price:
    €36.04
    Listing:
    €48.04
    You Save:
    - 25%
  5. 5
    International Interprotect Primer 0,75 Lt White YPA400 #458COL656
    High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling tie coat for use over epoxy primers.
    Price:
    €36.04
    Listing:
    €48.04
    You Save:
    - 25%
  6. 6
    International Interprotect Primer 2,5 Lt Grey YPA403 #458COL657
    High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling tie coat for use over epoxy primers.
    Price:
    €104.08
    Listing:
    €138.78
    You Save:
    - 25%
  7. 7
    International Interprotect Primer 2,5 Lt White YPA400 #458COL658
    High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling tie coat for use over epoxy primers.
    Price:
    €104.08
    Listing:
    €138.78
    You Save:
    - 25%
  8. 8
    International Gelshield 200 Osmosis Treatment A+B 0,75 Lt Green YPA212 #458COL677
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used down to 5 ° C.
    Price:
    €44.90
    Listing:
    €63.96
    You Save:
    - 30%
  9. 9
    International Gelshield 200 Osmosis Treatment A+B 2,5 Lt Green YPA212 #458COL678
    Epoxy primer fast drying and easy to apply, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used down to 5 ° C.
    Price:
    €99.90
    Listing:
    €190.93
    You Save:
    - 48%
  10. 10
    International Gelshield 200 Osmosis Treatment A+B 0,75 Lt Grey #458COL679
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used even at 5 ° C.
    Price:
    €44.90
    Listing:
    €63.96
    You Save:
    - 30%
  11. 11
    International Gelshield 200 Osmosis Treatment A+B 2,5 Lt Grey #458COL680
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used even at 5 ° C.
    Price:
    €99.90
    Listing:
    €190.93
    You Save:
    - 48%