• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    International Yacht Primer 0,75 Lt Grey YPA275 #458COL1095
    Price:
    €26.08
    Listing:
    €34.77
    You Save:
    - 25%
  2. 2
    International Danboline 2,5 Lt White YMA102 #458COL694
    Price:
    €69.77
    Listing:
    €93.03
    You Save:
    - 25%
  3. 3
    International Thinner No.1 1 Lt #458COL6500
    Price:
    €14.55
    Listing:
    €19.40
    You Save:
    - 25%
  4. 4
    Veneziani Resin 2000 A+B 1,5 Lt #473COL226
    Price:
    €60.61
    Listing:
    €75.76
    You Save:
    - 20%
  5. 5
    International Micron Extra EU Self-polishing Antifouling 5 Lt #458COL1081
    Price:
    €259.90
    Listing:
    €617.32
    You Save:
    - 58%

International Antifouling Boatguard EU 5 Lt #458COL1064

International Antifouling Boatguard EU 5 Lt #458COL1064

Boatguard EU is a cruising antifouling designed specifically to provide good antifouling protection in moderate to low fouling challenges.

Listing:
€305.00
Price:
€164.90
You Save:
€140.10 (46%)
Combination not available

PRODUCT DESCRIPTION
Boatguard EU is a cruising antifouling designed specifically to provide good antifouling protection in moderate to low fouling challenges.
* Season long antifouling protection
* Can be applied up to 3 months before launch
* Specially formulated for use in fresh and brackish waters whilst also performing well in salt water

PRODUCT INFORMATION
Colour YBB810-Dover White, YBB811-Blue, YBB812-Red , YBB813-Black , YBB814-Navy
Finish: Matt
Specific Gravity 1.69
Volume Solids 60%
Typical Shelf Life: 2 yrs
VOC (As Supplied) 351 g/lt
Unit Size: 750 ml, 2.5 Lt, 5 Lt, 20 Lt

Note: Not all pack sizes are available in all countries. Consult with your local Technical Representative for further information.

DRYING/OVERCOATING INFORMATION
Drying
5°C (41°F)  15°C (59°F)  23°C (73°F)  35°C (95°F)
Touch Dry 1 hrs 45 mins 30 mins 20 mins
Immersion 24 hrs 10 hrs 4 hrs 4 hrs
Note: Max. Immersion Times are as follows: 5-15°C - 3 mths; 23°C - 2 mths; 35°C - 1 mth
Overcoating
Substrate Temperature
5°C (41°F)  15°C (59°F)  23°C (73°F)  35°C (95°F)
Overcoated By Min Max Min Max Min Max Min Max
Boatguard EU 16 hrs ext 10 hrs ext 6 hrs ext 4 hrs ext

APPLICATION AND USE
Preparation PREVIOUSLY ANTIFOULED SURFACE:
In Good Condition: Rinse with fresh water and allow to dry. If old antifouling is incompatible or unknown, seal with Primocon.
In Poor Condition: Use Interstrip to remove all traces of antifouling.

PRIMING All preparation for bare substrates is covered on the appropriate primer labels.
NATURAL GRP: Gelshield 200 for osmosis protection, or Primocon.
STEEL/IRON: Interprotect or Primocon.
WOOD: Interprotect or Primocon.

Useful tips: Mixing: Stir well before use.
Thinning is not recommended.
Cleaning Solvent: YTA085 Thinners No.3
Ventilation and Humidity Control: Ensure adequate ventilation during use.
Airless Spray Pressure: 176-210 bar. Nozzle diameter: 2180.
SPRAY APPLICATION - PROFESSIONAL APPLICATORS ONLY.

Other: For Airmix spray application - Pressure: 2.5 bar.  Nozzle diameter: 20-113. True colour will develop after immersion.
Some Important Points: To prevent premature failure, ensure the correct amount of paint is applied using the coverage/spreading rate as a guide.
Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F.
Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F.
Substrate temperature should be minimum 1°C above dew point and maximum 35°C.

Compatibility/Substrates:
GRP, wood, steeliIron, lead. Not suitable for use over aluminium/alloy substrates or zinc coated surfaces. Can be applied directly over most types of antifoulings, provided they are in sound condition Not compatible with VC 17m systems. Please contact your local International Coatings Ltd. representative for further information.

Number of Coats Brush/Roller: Apply 2 coats per season on the hull. 3 coats are required on the leading and trailing edges, waterline, rudder and keel. This is important for best performance.
Spray: 2 coats.
Coverage/spreading rate (Theoretical) - 10 m²/lt per coat by brush/roller, 5 m²/lt by spray
(Practical) - 9 m²/lt per coat by brush/roller, 3 m²/lt by spray
Recommended DFT (dry film thicknesss) per coat 60 microns per coat by brush/roller, 120 microns  by spray
Recommended WFT (wet film thickness) per coat 100 microns per coat by brush/roller, 200 microns by spray

Application Methods Airless Spray, Brush, Roller

TRANSPORTATION, STORAGE AND SAFETY INFORMATION

Storage GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.

TRANSPORTATION:
Boatguard EU should be kept in securely closed containers during transport and storage.

Safety GENERAL:
Contains biocides. Antifoulings should only be wet sanded. Never dry sand or burn-off old antifoulings. Read the label safety section for Health and Safety Information.

DISPOSAL:
Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
Remainders of Boatguard EU cannot be disposed of through the municipal waste route or dumped without permit.
Disposal of remainders must be arranged for with local authorities.

IMPORTANT NOTES: The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further enquiries as to the suitability of the product for the intended purpose does so at his own risk.

  1. 1
    International Thinner No.3 1 Lt #458COL652
    Thinner No.3 is suitable for diluting Antifouling Coating, hulls and other special products
    Price:
    €15.65
    Listing:
    €20.86
    You Save:
    - 25%
  2. 2
    International Primocon Primer 0,75 Lt Grey YPA984 458COL653
    Primer conventional tar free, quick drying. Suitable for application on all the underwater surfaces, on which also carries out an effective anti-corrosive action.
    Price:
    €27.11
    Listing:
    €36.14
    You Save:
    - 25%
  3. 3
    International Primocon Primer 2,5 Lt Grey YPA984 #458COL654
    Tar­free, quick drying conventional one ­part primer for all substrates underwater. Suitable for application on all the underwater surfaces, on which an effective anti-corrosive action is also carried out.
    Price:
    €75.49
    Listing:
    €100.65
    You Save:
    - 25%
  4. 4
    International Interprotect Primer 0,75 Lt Grey YPA403 #458COL655
    High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling tie coat for use over epoxy primers.
    Price:
    €36.04
    Listing:
    €48.04
    You Save:
    - 25%
  5. 5
    International Interprotect Primer 0,75 Lt White YPA400 #458COL656
    High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling tie coat for use over epoxy primers.
    Price:
    €36.04
    Listing:
    €48.04
    You Save:
    - 25%
  6. 6
    International Interprotect Primer 2,5 Lt Grey YPA403 #458COL657
    High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling tie coat for use over epoxy primers.
    Price:
    €104.08
    Listing:
    €138.78
    You Save:
    - 25%
  7. 7
    International Interprotect Primer 2,5 Lt White YPA400 #458COL658
    High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling tie coat for use over epoxy primers.
    Price:
    €104.08
    Listing:
    €138.78
    You Save:
    - 25%
  8. 8
    International Gelshield 200 Osmosis Treatment A+B 0,75 Lt Green YPA212 #458COL677
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used down to 5 ° C.
    Price:
    €44.90
    Listing:
    €63.96
    You Save:
    - 30%
  9. 9
    International Gelshield 200 Osmosis Treatment A+B 2,5 Lt Green YPA212 #458COL678
    Epoxy primer fast drying and easy to apply, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used down to 5 ° C.
    Price:
    €99.90
    Listing:
    €190.93
    You Save:
    - 48%
  10. 10
    International Gelshield 200 Osmosis Treatment A+B 0,75 Lt Grey #458COL679
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used even at 5 ° C.
    Price:
    €44.90
    Listing:
    €63.96
    You Save:
    - 30%
  11. 11
    International Gelshield 200 Osmosis Treatment A+B 2,5 Lt Grey #458COL680
    Fast drying, easy to apply epoxy primer, for the protection of GRP against osmosis. It provides protection against osmosis in five coats (250 m). Can be used even at 5 ° C.
    Price:
    €99.90
    Listing:
    €190.93
    You Save:
    - 48%