• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Triple Gold Paint Roller L. 10 cm D. 41 mm H. 6 mm #478COL1070
    Price:
    €1.92
    Listing:
    €2.26
    You Save:
    - 15%
  2. 2
    Triple Gold Paint Roller  L.15cm D.41mm H.6mm #478COL1071
    Price:
    €2.70
    Listing:
    €3.17
    You Save:
    - 15%
  3. 3
    Plastic Paint Tray 26 x 32 x H6 cm Black #478COL977
    Price:
    €2.80
    Listing:
    €3.29
    You Save:
    - 15%
  4. 4
    Veneziani Raffaello Antifouling 5 Lt Black #473COL373
    Price:
    €243.01
    Listing:
    €373.93
    You Save:
    - 35%

Marlin Triton Antifouling 0,75 Lt Oxide Red #461COL457

Marlin Triton Antifouling 0,75 Lt Oxide Red  #461COL457

Excellent quality antifouling based on modified vinyl resins, cuprous oxide and organic antifouling compounds. Being a semi-hard matrix anti-fouling it has very well balanced solubility which makes it suitable for slow boats and speed boats.

Listing:
€38.31
Price:
€26.82
You Save:
€11.49 (30%)
Combination not available

MORE INFORMATION

Excellent quality antifouling based on modified vinyl resins, cuprous oxide and organic antifouling compounds. Being a semi-hard matrix anti-fouling it has  very well balanced solubility which makes it suitable for slow boats and speed boats.

USE

1. Remove all grease from the fiberglass surface using a solvent, or in the case of wooden or iron boat the final coat with an adequate epoxy curing cycle (for more information see MARLIN catalog).
2. Sand the surface well with medium coarse grit paper (80-120).
3. Apply one coat of FIBERGLASS PRIMER (both on fiberglass and epoxy cycle).
4. Wait at least 3 hours (20 ° C), then apply the first coat of TRITON.
5. After at least 6 hours (20 ° C), apply a second coat of TRITON.
6. After at least 6 hours, apply a third coat of TRITON over sharp edges or waterline
7. On hulls that have already been treated with TRITON, remove the porous surface layer with an energetic pressure wash or better still by sanding. The same procedure should be carried out even in the cases of other traditional antifouling, most of which TRITON is compatible with. In case of very porous surface, or one that is in bad condition, before TRITON, apply a coat of UNIVERSAL PRIMER diluted with about 20% of THINNER # 2.
8. Before launching, wait at least 16 hours (at 20 ° C or more) from the last coat.

WARNINGS

• Mix very thoroughly before use.
• Do not apply on light alloy boats.
• Do not use at temperatures below 0 ° C or above 38 ° C. In case of cold temperatures, before launching, it is important to wait at least 48 hours after the last coat.
• Apply at least 2 coats with minimum consumption of 9 m2 per coat (the overall consumption should never be less than 4.5m2/liter), and a third coat on the waterline and edges.
• Any underwater cleaning of the hull (with brushes, abrasive felt pads, sponges) significantly shortens the duration of protection, as each of these operations removes quite a lot of thickness.

TECHNICAL FEATURES
COLOR: oxide red, sky blue, sea blue, black, white
COVERAGE/SPREADING RATE: 8-9 m2 per coat
SPECIFIC GRAVITY: 1.50-1.60
TACK DRY: 30 minutes
TOUCH DRY: 3 hours at 20 ° C
COMPLETELY DRY: 16 hours at 20 °
RECOAT: minimum 6 hours, maximum 6 months
DRY FOR LAUNCHING: minimum 16 hours (depending on the thickness applied) - max 6 months
COATING METHODS: brush, spray, roller
THINNER: No. 2 (for spraying, about 10%)