• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Marlin 303 Antifouling S.L.A. 2,5 Lt Black #461COL468
    Price:
    €86.58
    Listing:
    €123.70
    You Save:
    - 30%
  2. 2
    Triple Gold Paint Roller L. 10 cm D. 41 mm H. 6 mm #478COL1070
    Price:
    €1.92
    Listing:
    €2.26
    You Save:
    - 15%
  3. 3
    Marlin Thinner N. 2 for Antifouling 0.5lt #461COL402
    Price:
    €3.93
    Listing:
    €5.61
    You Save:
    - 30%
  4. 4
    Triple Gold Paint Roller  L.15cm D.41mm H.6mm #478COL1071
    Price:
    €2.70
    Listing:
    €3.17
    You Save:
    - 15%
  5. 5
    Cfg concentrated biodegrdabile bilge cleaner - 1Lt - Code: 454LUB053
    Price:
    €10.12
    Listing:
    €11.25
    You Save:
    - 10%

International Sottosmalto Pre-Kote 0,75 Lt Blue/Grey YUG879 #458COL663

International Sottosmalto Pre-Kote 0,75 Lt Blue/Grey YUG879 #458COL663

Undercoat for use with International 1-part finishes and deck paints. Excellent opacity allows for easy colour changing. The tough, flexible resins are long lasting, easy to apply and rub down, giving a smooth base for the finishing coat.

Listing:
€24.71
Price:
€18.53
You Save:
€6.18 (25%)
Combination not available

PRODUCT DESCRIPTION
Undercoat for use with International 1-part finishes and deck paints. Excellent opacity allows for easy colour changing. The tough, flexible resins are long lasting, easy to apply and rub down, giving a smooth base for the finishing coat. Suitable for all primed wood, steel, alloy or GRP.
* Range of colours to complement topcoat
* Easy application and rub down

PRODUCT INFORMATION
Colour: YUB000-White, YUG879-Blue Grey
Finish: Low sheen
Specific Gravity 1.5
Volume Solids 47%
Typical Shelf Life: 2 yrs
VOC (As Supplied) 363 g/lt
Unit Size: 750 ml, 375 ml (some colours only), 2.5 Lt (some colours only)

DRYING/OVERCOATING INFORMATION
Drying
5°C (41°F)  15°C (59°F)  23°C (73°F)  35°C (95°F) 
Touch Dry 15 hrs 6 hrs 3 hrs 1 hrs
Sandable 48 hrs 30 hrs 24 hrs 24 hrs
Overcoating
Substrate Temperature
5°C (41°F)  15°C (59°F)  23°C (73°F)  35°C (95°F) 
Overcoated By Min Max Min Max Min Max Min Max
Brightside 36 hrs 4 days 24 hrs 3 days 16 hrs 2 days 4 hrs 1 days
Interdeck 36 hrs 4 days 24 hrs 3 days 16 hrs 2 days 4 hrs 1 days
Interlux Super 36 hrs 4 days 24 hrs 3 days 16 hrs 2 days 4 hrs 1 days
Pre-Kote 36 hrs 4 days 24 hrs 3 days 16 hrs 2 days 4 hrs 1 days
Super Gloss HS 36 hrs 4 days 24 hrs 3 days 16 hrs 2 days 4 hrs 1 days
Toplac 36 hrs 4 days 24 hrs 3 days 16 hrs 2 days 4 hrs 1 days

APPLICATION AND USE
Preparation: PREVIOUSLY PAINTED SURFACES
In Good Condition: Wash with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 280-320 grit paper.
In Poor Condition: Remove all previous coatings and prime the substrate.

BARE/NATURAL WOOD: Sand smooth with 80-180 grit paper and then 280 grit paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent, then allow to dry completely before applying primer. Prime using an International primer as detailed for specific coating systems.

STEEL: Degrease with solvent or suitable detergent cleaner. Gritblast to Sa 2½ - near white metal surface. If gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs to a uniform, clean, bright metal surface with a 50-75 microns anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry. Prime using an International primer as detailed for specific coating systems.

ALUMINIUM: Degrease with solvent or suitable detergent cleaner. Sand well using 24-120 grit (aluminium compatible) paper. Coarser grades are recommended to achieve optimum adhesion. Clean thoroughly and allow to dry. Prime using an International primer as soon as possible (within 8 hours) following product recommendations.

GRP: Degrease with solvent or suitable detergent cleaner. Sand well using 180-220 grit paper. Clean thoroughly and allow to dry. No primer required - apply Pre-Kote direct to GRP.
Method: Apply 1-2 coats. If maximum overcoating time of previous coating/primer is exceeded, abrade using 220-320 grit wet or dry paper. Remove dust with a dust wipe. To give extra depth of colour, blend the final coat of Pre-Kote 50:50 with Toplac.

Useful Tips: Mixing: Stir well before use.
Thinner Thinner No.1, Thinner 910 (Professional spray application only)
Cleaner Thinner No.1 
Ventilation and Humidity Control: Apply in dry, well ventilated conditions.
Airless Spray (Professional spray application only) Pressure: 180 bar. Tip Size: 1365-1580.
Conventional Spray (Professional spray application only): For conventional spray application, reduce viscosity using Thinner 910 to 20 - 24 seconds, BS4. Pressure: 3-4 bar. Tip Size: 1.4-1.8 mm.
Some Important Points: Formulated for exterior use.
Substrate temperature should be minimum 5°C/41°F and maximum 35°C/95°F. 
Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F. 
Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. 
Do not use below 5°C. 

Compatibility/Substrates: Can be applied over all Interfill products. Only overcoat with one-component paints. Not suitable for permanently immersed surfaces.
Number of Coats: 1-2
Coverage/spreading rate (Theoretical) - 13.33 m²/lt
(Practical) - 12 m²/lt by brush, 8 m²/lt by spray
Recommended dry film thickness (DFT) per coat 35 microns by brush
Recommended wet film thickness (WFT)per coat 74 microns by brush
Application Methods: Brush, roller, airless spray, conventional spray (Professional spray application only)

TRANSPORTATION, STORAGE AND SAFETY INFORMATION
Storage: GENERAL INFORMATION: Exposure to air and extremes of temperature should be avoided. For full shelf life of Pre-Kote,  ensure that the container is firmly between uses closed and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.

TRANSPORTATION:
Pre-Kote should be kept in securely closed containers during transport and storage.

Safety GENERAL:
Read the label safety section for Health and Safety Information.

DISPOSAL:
Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
Remainders of Pre-Kote cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for with local authorities.

IMPORTANT NOTES: The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further enquiries as to the suitability of the product for the intended purpose does so at his own risk.