• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: {price to quote}
Cart is empty.

Login

 
or
Login with PayPal
Cannot login with PayPal
Cannot login with Facebook

Top Sellers

  1. 1
    Triple Gold Paint Roller L. 10 cm D. 41 mm H. 6 mm #478COL1070
    Price:
    €1.92
    Listing:
    €2.26
    You Save:
    - 15%
  2. 2
    Triple Gold Paint Roller  L.15cm D.41mm H.6mm #478COL1071
    Price:
    €2.70
    Listing:
    €3.17
    You Save:
    - 15%
  3. 3
    Plastic Paint Tray 26 x 32 x H6 cm Black #478COL977
    Price:
    €2.80
    Listing:
    €3.29
    You Save:
    - 15%
  4. 4
    Veneziani Raffaello Antifouling 5 Lt Black #473COL373
    Price:
    €243.01
    Listing:
    €373.93
    You Save:
    - 35%

Attiva Pirate Self-Polishing Antifouling 0,75 Lt Dark Blue #451COL410

Attiva Pirate Self-Polishing Antifouling 0,75 Lt Dark Blue #451COL410

Self-polishing antifouling formulated according to a new technology that uses specific polymers and biocides allowing the solubility of the film.

Listing:
€31.94
Price:
€22.36
You Save:
€9.58 (30%)
Combination not available

MORE INFORMATION

DESCRIPTION: self-polishing antifouling
TYPE: self-polishing antifouling formulated according to a new technology that uses specific copolymer biocides allowing a film solubility.
RECOMMENDED USE: all media except aluminium and alloy metals. Boats with continuous cruising speed up to 35 knots
SPECIFIC WEIGHT: 1.78 2.02 – Kg/Lt
Volume solids %: 50% ± 2%
COVERAGE PER COAT: (50 MICRONS dry): Theoretical 10 m ²/lt practical: 8.7 ÷ 8 m ²/lt (loss factor: 13%-20%)
THICKNESS PER COAT: wet Film: 80-100 Microns dry Film Thickness: 40-50 Micron
RECOATING TIME: minimum: maximum: 6:00 N.L. (weather conditions)
LAUNCH TIME: minimum: 12:00.: Maximum 1 month (weather conditions)
APPLICATION METHOD: Brush-Roller
APPLICATION CONDITIONS: 5°-35° c. -max humidity: 85%, no wind, dust, rain
THINNER: max 110 3%. Preferably only on 1st coat
TEMP. Flash point: 35° c.

NOTE: all times are calculated at a temperature of 20°C and  change according to changes in temperature according to this rule: for every variation of about 10° C, times are doubled or halved.

PAINTING CYCLES

Preparation (new, or old media made new)

FIBERGLASS: Total and meticulous degreasing with antisilicone cleaner. Remove all the wax. An easy control system is to wet the hull and check the persistence of water droplets or streaks of oil through the sunrays. In that case repeat the degreasing otherwise there will be no adherence. Wash with fresh water only. Light sanding.


WOOD: wipe any grease, resin, glue. Strong sanding. Dry well. Proceed immediately to  stain the new wood with at least 2 coats of "Lignoguard" and allow to penetrate - sand.

STEEL/IRON: SA 2.5 sandblasting or ST 3 disking (with big disks). The metal should be primed as soon as possible from surface preparation treatment and before same present the beginning of oxidation.

PRIMER/UNDERCOATS (DEPENDING ON YOUR CHOICE OF ONE OR TWO COMPONENT CYCLES)

FIBERGLASS: 1 (15 micron) primer Fiberguard (or alternatively 1-component (50 microns) protective hull Marine Primer (epoxy two-component).

STEEL/WOOD: 1 (50 micron) primer (CR or Marine Primer) and 4 coats (200 microns) protective hull substrate CR (monocomp. chlorinated rubber) or alternatively 4 coats (200 microns) protective hull Marine Primer (epoxy two-component).

FINISHES

EACH MEDIUM: Apply 2 coats full of Pirate (100-110 μm) and 1 additional coat along the waterline and rudder. Not compatible on light alloys.

MAINTENANCE (SUPPORT/MEDIA ALREADY PAINTED)

Always remove the old antifouling to avoid potential incompatibility. This is always required if the previous antifouling is hard matrix that could adversely affect the grip/adherence of subsequent applications. If complete removal is not possible, prepare the old hull with strong sanding or at least washing with water under pressure. One in the case that reasonable doubts exist about the incompatibility between old and new antifouling apply 1 coat of primer (CR). Pirate is easily removed with water only if the hull is wet (ideally during hauling) or if it has dried due to sanding over time. If the new hull has been completeyl renewed, follow the cycles of new media except for wood where the stained primer is replaced by the first coat of the hull is diluted by 30% for better penetration of the wood. Please remember to totally renew the hull, up to its base, support every 5 years.

APPLICATION CONDITIONS

ATTENTION: stir well before and during the application • the protection is given only by applying the required thickness and this is achieved by applying the right amount in litres (divide the hull surface (m2) by the practical spreading rate (m2/lt) and multiply by the number of coats specified • do not use on aluminium and light alloys • since the times indicated in the card vary with the temperature, to reduce errors apply 1coat  per day and launch after 2 days • Apply longitudinally (do not crisscross as it loses thickness) • the waterline if covered with light colours (grey-white) can change color (can turn green or brown) due to oxidation by the air in relation to moisture.

Download
  1. 1
    Attiva Thinner 110 0,5 Lt #451COL393
    Antifouling - chlorinated rubber
    Price:
    €4.83
    Listing:
    €6.89
    You Save:
    - 30%